On Thu, Mar 31, 2016 at 11:26:04AM -0400, Trevor Woerner wrote: > On Fri 2016-03-18 @ 10:15:39 AM, David Weisgerber wrote: > > Hi, > > did anyone succeed in building an image that runs on Raspberry Pi 3? I set > > my > > conf/local.conf to > > > > MACHINE ??= "raspberrypi3" > > GPU_MEM = "128" > > DISABLE_OVERSCAN = "1" > > > > and built rpi-basic-image but when booting the Pi 3 up I only see 4 > > raspberries in the top right but nothing else happens. The image works > > perfectly on a Pi 2 though. > > I'm able to get a raspi3 image running on my Raspberry Pi 3, but my console is > messed up. Everything works fine via the usb+hdmi ports, but plugging a > console cable into the GPIO header is messed up. > > It looks like what happens when the baud rate is set incorrectly, but I've > tried every baud rate in my terminal emulator and it all looks the same > (messed up). > > Anyone got their console working? The same cable/setup works fine on the > raspi2 (ttyAMA0) but doesn't work on my raspi3 (ttyS0).
I think you are seeing this problem: https://github.com/raspberrypi/firmware/issues/553 /Josep -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto