On Sat, Jul 23, 2016 at 8:57 AM, Simon Bolek <[email protected]> wrote: > Hi, > > Well it is, as far as what > parted /dev/sda print > says. > > generated grub.cfg matches that with PARTUUID, so it looks fine. > > menuentry "Linux" { > search --no-floppy --fs-uuid e88ec2c7-3438-4fe3-9033-83eb81957875 --set > root > linux /vmlinuz root=PARTUUID=8316255c-f839-43fa-b2c6-d83bbed80962 rw > quiet
this seems ok to me. > > } > > However fdisks -l shows only /dev/sda1, which ist strange. > > Is there something wrong with install.sh script? > Compared to FIDO, it is GPT, not MSDOS. But i did not touch anything there. > Maybe you can take a look at it? > http://git.yoctoproject.org/cgit.cgi/poky/plain/meta/recipes-core/initrdscripts/files/init-install.sh?h=jethro > It always checks the grub version, however in FIDO Grub was also 2.00, so I > do not get the IFs. > > thank you! > Simon :-) > > > On Sat, Jul 23, 2016 at 4:52 PM, Khem Raj <[email protected]> wrote: >> >> >> > On Jul 23, 2016, at 5:25 AM, Simon Bolek <[email protected]> >> > wrote: >> > >> > Hello! >> > >> > I am trying to install genericx86 core-image-sato on a atom-pc device >> > with 80GB Intel SSD drive. >> > I have created an image with >> > bitbake core-image-sato >> > without changing anything in the kernel via menuconfig, etc. >> > >> > ps. after installation I had to set /dev/sda1 to bootable with disk >> >> it seems your rootfs is on /dev/sda3 can you check kernel parameters what >> is it passing for root= >> >> > >> > After installation I have got this ugly error while booting the device. >> > PLEASE HELP ME! >> > >> > >> > "... >> > VFS: Cannot open root device "PARTUUID=8316.." or unknown-block(0,0): >> > error -6 >> > Pease append a correct "root=" boot option; here are the available >> > partitions: >> > 0100 4096 ram0 (driver?) >> > ... >> > 010f 4096 ram15 (driver?) >> > ..." >> > >> > >> > I noticed that install.sh script is creating GPT >> > parted ${device} mktable gpt >> > not MSDOS as in previous yocto versions, e.g. fido. >> > >> > Any hint is more than welcome. The device will just not boot :(((( >> > >> > Here are some details about the device: >> > >> > >> > +++ >> > blkid says: >> > /dev/sda2: UUID="e88ec2c7-3438-4fe3-9033-83eb81957875" TYPE="ext3" >> > PARTLABEL="boot" PARTUUID="57f43ab0-6e30-4721-81e2-c565f6c184c8" >> > /dev/sda3: UUID="cbb77742-c9fe-4f19-85d7-399af99c3aa8" TYPE="ext3" >> > PARTLABEL="root" PARTUUID="8316255c-f839-43fa-b2c6-d83bbed80962" >> > /dev/sda4: TYPE="swap" PARTLABEL="swap" >> > PARTUUID="15ddbd73-15b3-40a8-97e7-6377048a79eb" >> > /dev/sdb: SEC_TYPE="msdos" LABEL="boot" UUID="3C80-C1D7" TYPE="vfat" >> > /dev/sda1: PARTLABEL="bios_boot" >> > PARTUUID="11cf26d2-2333-4c5b-a876-59d65929085f" >> > >> > +++ >> > /etc/fstab says >> > # stock fstab - you probably want to override this with a machine >> > specific one >> > >> > /dev/root / auto defaults >> > 1 1 >> > proc /proc proc defaults >> > 0 0 >> > devpts /dev/pts devpts mode=0620,gid=5 >> > 0 0 >> > tmpfs /run tmpfs >> > mode=0755,nodev,nosuid,strictatime 0 0 >> > tmpfs /var/volatile tmpfs defaults >> > 0 0 >> > >> > # uncomment this if your device has a SD/MMC/Transflash slot >> > #/dev/mmcblk0p1 /media/card auto >> > defaults,sync,noauto 0 0 >> > >> > /dev/sda2 / ext3 rw >> > 0 1 >> > /dev/disk/by-partuuid/15ddbd73-15b3-40a8-97e7-6377048a79eb >> > swap swap defaults 0 0 >> > UUID=e88ec2c7-3438-4fe3-9033-83eb81957875 /boot >> > ext3 defaults 1 2 >> > >> > >> > +++ >> > fdisk -l says >> > Disk /dev/sda: 80.0 GB, 80026361856 bytes >> > 255 heads, 63 sectors/track, 9729 cylinders >> > Units = cylinders of 16065 * 512 = 8225280 bytes >> > >> > Device Boot Start End Blocks Id System >> > /dev/sda1 * 1 9730 78150743+ ee EFI GPT >> > >> > +++ >> > parted /dev/sda says >> > Model: ATA INTEL SSDSA2M080 (scsi) >> > Disk /dev/sda: 80.0GB >> > Sector size (logical/physical): 512B/512B >> > Partition Table: gpt >> > Disk Flags: pmbr_boot >> > >> > Number Start End Size File system Name Flags >> > 1 1049kB 2097kB 1049kB bios_boot bios_grub >> > 2 2097kB 19.9MB 17.8MB ext3 boot >> > 3 22.0MB 76.0GB 76.0GB ext3 root >> > 4 76.0GB 80.0GB 4001MB linux-swap(v1) swap >> > >> > +++ >> > lspci says >> > Device: 00:1f.2 >> > Class: IDE interface >> > Vendor: Intel Corporation >> > Device: NM10/ICH7 Family SATA Controller [IDE mode] >> > SVendor: Intel Corporation >> > SDevice: Device 464c >> > Rev: 01 >> > ProgIf: 8a >> > Driver: ata_piix >> > Module: ata_piix >> > >> > >> > thank you >> > Simon :-) >> > >> > >> > >> > -- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
