Thanks, sorry that I bother you all the time, but I do not seem to make any progress :( Is there anything else I can check? It seems, on boot time this device is not mounted, only ram0...15.
thank you Simon :-) On Sat, Jul 23, 2016 at 6:07 PM, Khem Raj <[email protected]> wrote: > On Sat, Jul 23, 2016 at 8:57 AM, Simon Bolek <[email protected]> > wrote: > > Hi, > > > > Well it is, as far as what > > parted /dev/sda print > > says. > > > > generated grub.cfg matches that with PARTUUID, so it looks fine. > > > > menuentry "Linux" { > > search --no-floppy --fs-uuid e88ec2c7-3438-4fe3-9033-83eb81957875 > --set > > root > > linux /vmlinuz root=PARTUUID=8316255c-f839-43fa-b2c6-d83bbed80962 rw > > quiet > > this seems ok to me. > > > > > } > > > > However fdisks -l shows only /dev/sda1, which ist strange. > > > > Is there something wrong with install.sh script? > > Compared to FIDO, it is GPT, not MSDOS. But i did not touch anything > there. > > Maybe you can take a look at it? > > > http://git.yoctoproject.org/cgit.cgi/poky/plain/meta/recipes-core/initrdscripts/files/init-install.sh?h=jethro > > It always checks the grub version, however in FIDO Grub was also 2.00, > so I > > do not get the IFs. > > > > thank you! > > Simon :-) > > > > > > On Sat, Jul 23, 2016 at 4:52 PM, Khem Raj <[email protected]> wrote: > >> > >> > >> > On Jul 23, 2016, at 5:25 AM, Simon Bolek <[email protected]> > >> > wrote: > >> > > >> > Hello! > >> > > >> > I am trying to install genericx86 core-image-sato on a atom-pc device > >> > with 80GB Intel SSD drive. > >> > I have created an image with > >> > bitbake core-image-sato > >> > without changing anything in the kernel via menuconfig, etc. > >> > > >> > ps. after installation I had to set /dev/sda1 to bootable with disk > >> > >> it seems your rootfs is on /dev/sda3 can you check kernel parameters > what > >> is it passing for root= > >> > >> > > >> > After installation I have got this ugly error while booting the > device. > >> > PLEASE HELP ME! > >> > > >> > > >> > "... > >> > VFS: Cannot open root device "PARTUUID=8316.." or unknown-block(0,0): > >> > error -6 > >> > Pease append a correct "root=" boot option; here are the available > >> > partitions: > >> > 0100 4096 ram0 (driver?) > >> > ... > >> > 010f 4096 ram15 (driver?) > >> > ..." > >> > > >> > > >> > I noticed that install.sh script is creating GPT > >> > parted ${device} mktable gpt > >> > not MSDOS as in previous yocto versions, e.g. fido. > >> > > >> > Any hint is more than welcome. The device will just not boot :(((( > >> > > >> > Here are some details about the device: > >> > > >> > > >> > +++ > >> > blkid says: > >> > /dev/sda2: UUID="e88ec2c7-3438-4fe3-9033-83eb81957875" TYPE="ext3" > >> > PARTLABEL="boot" PARTUUID="57f43ab0-6e30-4721-81e2-c565f6c184c8" > >> > /dev/sda3: UUID="cbb77742-c9fe-4f19-85d7-399af99c3aa8" TYPE="ext3" > >> > PARTLABEL="root" PARTUUID="8316255c-f839-43fa-b2c6-d83bbed80962" > >> > /dev/sda4: TYPE="swap" PARTLABEL="swap" > >> > PARTUUID="15ddbd73-15b3-40a8-97e7-6377048a79eb" > >> > /dev/sdb: SEC_TYPE="msdos" LABEL="boot" UUID="3C80-C1D7" TYPE="vfat" > >> > /dev/sda1: PARTLABEL="bios_boot" > >> > PARTUUID="11cf26d2-2333-4c5b-a876-59d65929085f" > >> > > >> > +++ > >> > /etc/fstab says > >> > # stock fstab - you probably want to override this with a machine > >> > specific one > >> > > >> > /dev/root / auto defaults > >> > 1 1 > >> > proc /proc proc defaults > >> > 0 0 > >> > devpts /dev/pts devpts mode=0620,gid=5 > >> > 0 0 > >> > tmpfs /run tmpfs > >> > mode=0755,nodev,nosuid,strictatime 0 0 > >> > tmpfs /var/volatile tmpfs defaults > >> > 0 0 > >> > > >> > # uncomment this if your device has a SD/MMC/Transflash slot > >> > #/dev/mmcblk0p1 /media/card auto > >> > defaults,sync,noauto 0 0 > >> > > >> > /dev/sda2 / ext3 rw > >> > 0 1 > >> > /dev/disk/by-partuuid/15ddbd73-15b3-40a8-97e7-6377048a79eb > >> > swap swap defaults 0 0 > >> > UUID=e88ec2c7-3438-4fe3-9033-83eb81957875 /boot > >> > ext3 defaults 1 2 > >> > > >> > > >> > +++ > >> > fdisk -l says > >> > Disk /dev/sda: 80.0 GB, 80026361856 bytes > >> > 255 heads, 63 sectors/track, 9729 cylinders > >> > Units = cylinders of 16065 * 512 = 8225280 bytes > >> > > >> > Device Boot Start End Blocks Id System > >> > /dev/sda1 * 1 9730 78150743+ ee EFI GPT > >> > > >> > +++ > >> > parted /dev/sda says > >> > Model: ATA INTEL SSDSA2M080 (scsi) > >> > Disk /dev/sda: 80.0GB > >> > Sector size (logical/physical): 512B/512B > >> > Partition Table: gpt > >> > Disk Flags: pmbr_boot > >> > > >> > Number Start End Size File system Name Flags > >> > 1 1049kB 2097kB 1049kB bios_boot bios_grub > >> > 2 2097kB 19.9MB 17.8MB ext3 boot > >> > 3 22.0MB 76.0GB 76.0GB ext3 root > >> > 4 76.0GB 80.0GB 4001MB linux-swap(v1) swap > >> > > >> > +++ > >> > lspci says > >> > Device: 00:1f.2 > >> > Class: IDE interface > >> > Vendor: Intel Corporation > >> > Device: NM10/ICH7 Family SATA Controller [IDE mode] > >> > SVendor: Intel Corporation > >> > SDevice: Device 464c > >> > Rev: 01 > >> > ProgIf: 8a > >> > Driver: ata_piix > >> > Module: ata_piix > >> > > >> > > >> > thank you > >> > Simon :-) > >> > > >> > > >> > > >> > > >
-- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
