On Sat, Jun 30, 2007 at 11:14:45AM -0400, Daniel Drake wrote: > > Either the firmware is not installed correctly, or your distro keeps > firmware somewhere else than /lib/firmware, or your firmware loader is > broken. > > Also make sure zd1211rw is a module and not built in.
Yes, it is compiled as a module. Indeed, it was a firmware loader issue, which I solved with an upgrade. Now it appears that the module initialization sequence can go a bit further, but without reaching completion yet. Please see the dmesg excerpt below. Does the "UNKNOWN_A_RF 0xa" correspond to the unsupported UW2453? zd1211rw usb_init() usb 1-1.4: print_id() 129b:1667 v4810 high usb 1-1.4: reset high speed USB device using ehci_hcd and address 7 PM: Removing info for No Bus:usbdev1.7_ep01 PM: Removing info for No Bus:usbdev1.7_ep82 PM: Removing info for No Bus:usbdev1.7_ep83 PM: Removing info for No Bus:usbdev1.7_ep04 PM: Adding info for No Bus:usbdev1.7_ep01 PM: Adding info for No Bus:usbdev1.7_ep82 PM: Adding info for No Bus:usbdev1.7_ep83 PM: Adding info for No Bus:usbdev1.7_ep04 zd1211rw 1-1.4:1.0: zd_netdev_alloc() netdev->flags 0x1002 zd1211rw 1-1.4:1.0: zd_netdev_alloc() netdev->features 0x00000000 usb 1-1.4: request_fw_file() fw name zd1211/zd1211b_ub PM: Adding info for No Bus:1-1.4 PM: Removing info for No Bus:1-1.4 usb 1-1.4: upload_firmware() firmware device id 0x4810 is equal to the actual device id usb 1-1.4: request_fw_file() fw name zd1211/zd1211b_uphr PM: Adding info for No Bus:1-1.4 PM: Removing info for No Bus:1-1.4 usb 1-1.4: upload_code() transfer size 4096 usb 1-1.4: upload_code() transfer size 1024 usb 1-1.4: upload_code() firmware confirm return value 0x01 PM: Removing info for No Bus:usbdev1.7_ep01 PM: Removing info for No Bus:usbdev1.7_ep82 PM: Removing info for No Bus:usbdev1.7_ep83 PM: Removing info for No Bus:usbdev1.7_ep04 PM: Adding info for No Bus:usbdev1.7_ep01 PM: Adding info for No Bus:usbdev1.7_ep82 PM: Adding info for No Bus:usbdev1.7_ep83 PM: Adding info for No Bus:usbdev1.7_ep04 zd1211rw 1-1.4:1.0: zd_usb_enable_int() zd1211rw 1-1.4:1.0: zd_usb_enable_int() submit urb ca0412a0 zd1211rw 1-1.4:1.0: zd_chip_init_hw() zd1211rw 1-1.4:1.0: dump_cr() CR_AFTER_PNP 0x00000000 zd1211rw 1-1.4:1.0: dump_cr() CR_GPI_EN 0x00000000 zd1211rw 1-1.4:1.0: dump_cr() CR_INTERRUPT 0x00000000 zd1211rw 1-1.4:1.0: read_fw_regs_offset() fw_regs_base: 0xf7f1 zd1211rw 1-1.4:1.0: read_pod() E2P_POD 0x8000000a zd1211rw 1-1.4:1.0: read_pod() RF UNKNOWN_A_RF 0xa PA type 0x0 patch CCK 0 patch CR157 0 patch 6M 0 new PHY 1 link LED2 tx led 1 zd1211rw 1-1.4:1.0: hw_init() zd1211rw 1-1.4:1.0: zd1211b_hw_reset_phy() zd1211rw 1-1.4:1.0: zd_chip_lock_phy_regs() CR_REG1: 0x00 -> 0x00 zd1211rw 1-1.4:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x00 -> 0x80 zd1211rw 1-1.4:1.0: zd1211b_hw_init_hmac() zd1211rw 1-1.4:1.0: get_aw_pt_bi() aw 0 pt 0 bi 0 zd1211rw 1-1.4:1.0: set_aw_pt_bi() aw 0 pt 99 bi 100 zd1211rw 1-1.4:1.0: RF UNKNOWN_A_RF 0xa is not supported zd1211rw 1-1.4:1.0: zd_usb_disable_int() urb ca0412a0 killed zd1211rw 1-1.4:1.0: probe() couldn't initialize mac. Error number -19 usb 1-1.4: reset high speed USB device using ehci_hcd and address 7 PM: Removing info for No Bus:usbdev1.7_ep01 PM: Removing info for No Bus:usbdev1.7_ep82 PM: Removing info for No Bus:usbdev1.7_ep83 PM: Removing info for No Bus:usbdev1.7_ep04 PM: Adding info for No Bus:usbdev1.7_ep01 PM: Adding info for No Bus:usbdev1.7_ep82 PM: Adding info for No Bus:usbdev1.7_ep83 PM: Adding info for No Bus:usbdev1.7_ep04 usbcore: registered new interface driver zd1211rw zd1211rw initialized Thanks, David -- David Santinoli Tieffe Sistemi S.r.l. viale Piceno 21, Milano www.tieffesistemi.com tel. +39 02 45490882 ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
