In the webgui menu path > "Settings >> Server" there is a section named:
*Physical interface where is running GUI service *field (copied from official documentation: *Physical interface where is running the GUI service*. This is the interface where the web panel service will be bind to. It's safe to keep the *All interfaces* enabled. To apply the changes it's needed to restart the GUI service.) After this configure your cluster in other interface with your crossover cable. Enjoy it!* * 2012/9/19 Tim.Chipman <[email protected]> > Hi Dave, > > I don't think using a crossover cable is necessary; maybe keep things > simpler ? > > My HA cluster pairs of ZenLoadBalancer, > > - KVM based VMs (with virtio ether and disk - well supported on debian:ZLB) > - single network interface for each ZLB node > - multiple virtual interfaces on each physical interface, managed via zlb > web management gui, ie, > > eth0 = actual IP for device > eth0:1 = VIP for the HA pair / web admin access > eth0:3 = VIP for farm service one in ha config > eth0:6 = VIP for farm service two in ha config > > I suspect you could use multiple physical interfaces if you really wanted, > as follows, > > eth0 = actual IP for device > eth0:1 = VIP for the HA pair / web admin access > eth1:1,2,3,4 = VIPs for for various farm services > > clearly eth0 and eth1 need to cable into different subnets or vlans to > ensure traffic goes where appropriate (management vs public). This would > segregate your management access from load-balance:farm traffic. > > Tim > > > -- > Tim Chipman -- Fortech I.T. [email protected] > (902) 442-6633http://FortechITSolutions.ca > > > > On 09/19/2012 04:03 PM, [email protected] wrote: > > Hey all,**** > > ** ** > > Just a question. **** > > ** ** > > I have created my cluster config using a x-over cable between the two > nodes and configured a VIP on that network. I’ve also configured a couple > of other networks for links to the Web servers for instance, and a VIP for > the front channel facing the web. What I’m wondering is that, is there any > way to have a management network so that I can get to both cluster devices > ? Once I enable the cluster I lose all network connections to the 2ndary > device except the one interface that is back to back with the x-over > cable. **** > > ** ** > > Dave**** > > ** ** > > [image: cid:[email protected]] > Dave Lewis > E-Solutions Infrastructure and Support & OpenLane Support > Bell Business Markets > 160 Elgin St, suite 655, > Ottawa, Ontario, K2P 2C4 > Tel : 613-781-1976 > Pg : 613-786-0485 > Cell : 613-297-6385 > > Thecontent of this message is subject to our e-mail confidentiality policy. > www.bell.ca/enterprise/EntGnl_EmailConfidentialityWarning.page?language=en > **** > > ** ** > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > > > > _______________________________________________ > Zenloadbalancer-support mailing > [email protected]https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support > > > > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Zenloadbalancer-support mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support > > -- Load balancer distribution - Open Source Project http://www.zenloadbalancer.com Distribution list (subscribe): [email protected]
<<image/gif>>
------------------------------------------------------------------------------ Got visibility? Most devs has no idea what their production app looks like. Find out how fast your code is with AppDynamics Lite. http://ad.doubleclick.net/clk;262219671;13503038;y? http://info.appdynamics.com/FreeJavaPerformanceDownload.html
_______________________________________________ Zenloadbalancer-support mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/zenloadbalancer-support
