Brandon,
Not sure what version of zenoss you are using but we have had a
problem where the modeler hits a box with too many requests at once
and they timeout sometimes (collection is inconsistent). I think this
is fixed in the trunk not sure about release 22.1
-EAD
On Aug 23, 2006, at 4:32 AM, Brandon Parker wrote:
Last one for tonight.
zenmodeler will apparently only gather info one time, whether the
device has been 'removed' or not.
zenperfsnmp will work on a device that zenmodeler has timeout out on.
I'm thinking that I have to remove any trace of a device in order
for zenmodeler to do it's thing...
If that is the right track, how to go about it?
On 8/23/06, Brandon Parker <[EMAIL PROTECTED] > wrote:
More joy.
I went to add a 2k server, and initally failed. So i restarted the
zenoss service and had success. I then went to add a second 2k
server, failed to gather datils, but added the name. So, i
restarted again, same result.
After deleting the initial 2k server, I cannot rediscover it,
zenoss restarts and all, altho snmp walk still works...
Brandon
On 8/22/06, Brandon Parker <[EMAIL PROTECTED]> wrote:
Some testing data [as seen in the previous posts]
[EMAIL PROTECTED] bin]# zenperfsnmp run -v 10 -d 'xxxx'
DEBUG:zen.zenperfsnmp:Gathering performance data for 'xxxx'
DEBUG:zen.zenperfsnmp:Configured 1 devices
DEBUG:zen.zenperfsnmp:received config for 'xxxx'
DEBUG:zen.zenperfsnmp:Updated configCycleInterval config to 30
DEBUG:zen.zenperfsnmp:Updated snmpCycleInterval config to 60
DEBUG:zen.zenperfsnmp:getting device ping issues
DEBUG:zen.zenperfsnmp:Unresponsive devices: []
INFO:zen.zenperfsnmp:collected 1 of 1 devices in 0.12
DEBUG:zen.zenperfsnmp:Sent 4 SNMP OID requests
WARNING:zen.zenperfsnmp:Error collecting data on USWESMLS01,
recollecting
WARNING:zen.zenperfsnmp:Error reading value for
"cpuPercentProcessorTime" on 'xxxx' (oid .
1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108 is bad)
WARNING:zen.zenperfsnmp:Error reading value for
"memoryAvailableKBytes" on 'xxxx' (oid .1.3.6.1.4.1.9600.1.1.2.2.0
is bad)
WARNING:zen.zenperfsnmp:Error reading value for "memoryPagesPerSec"
on 'xxxx' (oid .1.3.6.1.4.1.9600.1.1.2.10.0 is bad)
As before, 'snmpwalk -v 1 public x.x.x.x -m ALL' works and returns
a plethora of info.
Akin to the post by Mr. Herbert of 14 August, I've deleted the
objects and deleted the folders.
Thoughts or next steps to troubleshoot?
Thanks, Brandon
On 8/22/06, Brandon Parker <[EMAIL PROTECTED]> wrote:
Hi,
So, I ran into this once before, and had to reboot the windows
machine, it not being in production and thereby not being an issue.
Right now what I am facing is as follows:
'snmpwalk -v 1 public x.x.x.x -m ALL' works and returns a plethora
of info
zenoss to the same x.x.x.x ip, v1 public, times out, although it
resolves the hostname of the system and add's it
This is the same behaviour of the machine I rebooted, prior to
reboot, upon which everything populated. There is no snmp
informant installed here, but I should be getting something more
than the hostname eh?
Any thougths as to what this may be beside's a joy solved by
rebooting the 2k3 server?
Brandon
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
