Ive tried restaring the services and waiting, but no luck. Ive had the devices added for about a week now and its still not showing anything. The applicance has been restarted a few times over the week as well. Any other ideas? Maybe there is something I need to enable on Windows or Zenoss from the base installs? (The servers are definatly added into /Servers/Windows).
Cheers guys. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Newton Sent: 27 November 2006 14:42 To: General discussion of using zenoss system Subject: Re: [zenoss-users] Base Windows Monitoring Setup[Scanned] This may explain the problem: http://dev.zenoss.org/trac/wiki/FAQ#IjustaddedsomedeviceswhydontIseeanyp erformancegraphs -Eric Christopher Brazier wrote: > Hi All, > > I am trying out using Zenoss to eventually monitor about 50-100 > windows based servers. I have downloaded and run the VMware Appliance, > connected to it, and tried adding a Windows 2003 SBS Server (brand new > fresh build on a test box). Before adding the server, I made sure > there was SNMP service enabled on it, and there was a public RO > community and a private RW communtity. After adding the server, things > like the IP addresses, routing tables, etc came up fine. (so SNMP is > working) However things like uptime, disk space remaining, and all the Perf information did not. > To best describe it, It is looking like the sample windows server is > in the quick tour (http://www.zenoss.com/product/tour/sample_os). > My question is, how do I enable all the things such as uptime, disk > space, etc, so after adding a server it looks like it does in the > Administators Guide? I have tried installing smnp informant standard > on the server, deleting it out of zenoss and readding it, but with no > effect. And from what I can tell from a MIB browser, the information > is there on the server to be collected. > I have tired looking through all the documentation on the website, and > had a quick flip through the mailing list archives and google, but > could come up with nothing. According to the administrators guide, all > you need to do is enable the SNMP service on the windows box. > Please bare in mind this is a fresh Windows 2003 install and a fresh > Zenoss Applicance download. > > Many thanks in advance, > > > Chris > > > ---------------------------------------------------------------------- > -- > > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
