Hello to all
Well my system is up, but i like to close the access for snmp in
linux, just like windows giev only one ip for query snmp.
This the snmp conf gave zenoss default conf.
Many thanks to all.
Cesar L.
---------------------
####
# First, map the community name "public" into a "security name"
# sec.name source community
com2sec notConfigUser default Somecommunity
####
# Second, map the security name into a group name:
# groupName securityModel securityName
group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser
####
# Third, create a view for us to let the group have rights to:
# Make at least snmpwalk -v 1 localhost -c public system fast again.
# name incl/excl subtree mask(optional)
view systemview included .1
####
# Finally, grant the group read-only access to the systemview view.
# group context sec.model sec.level prefix read write
notif
access notConfigGroup "" any noauth exact systemview
none none
###############################################################################
# System contact information
#
# It is also possible to set the sysContact and sysLocation system
# variables through the snmpd.conf file:
syslocation Unknown (edit /etc/snmp/snmpd.conf)
syscontact Root <[EMAIL PROTECTED]> (configure /etc/snmp/snmp.local.conf)
# Added for support of bcm5820 cards.
pass .1 /usr/bin/ucd5820stat
###############################################################################
# Further Information
#
# See the snmpd.conf manual page, and the output of "snmpd -H".
trapcommunity public
trapsink default
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
