John, On your Linux boxes, the OS tab is completely empty? It sounds like an SNMP issue. Use 'snmpwalk' to see if you can access any of the data such as disk space, etc. If not, you will need need to tweak your snmpd.conf.
Josh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Gardner Sent: Thursday, January 04, 2007 9:32 AM To: [email protected] Subject: [zenoss-users] SMNP Question I've set up a block of 10 mixed Linux and Windows servers to be monitored via SNMP by Zenoss. They are both working well, apart from the initial data that populates the OS, Software tabs under the Devices section. Windows servers are fine, both of the tabs are populated, but on my Linux servers, neither of these tabs are populated... Is this a problem with Zenoss, or is this to do wth snmpd.conf on the individual Linuzx boxes? Thanks in advance. John _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
