Hi, Greg! Thank you for your help! as I wrote in previous message copy method did not work but I entered the parameters and value from " <http://10.16.0.40:8080/zport/dmd/Devices/rrdTemplates/ethernetCsmacd> ethernetCsmacd" to " <http://10.16.0.40:8080/zport/dmd/Devices/rrdTemplates/Multirate%20HDSL2> Multirate HDSL2" and it works I can see the graph ! Thank you But i cannot understand why copy method did not work? Valery
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Greg Haygood Sent: Saturday, February 24, 2007 4:58 PM To: General discussion of using zenoss system Subject: Re: [zenoss-users] Problems with Graph SDSL interfaces I need HELP! Hi, Valery. This thread on the forum covers how to get the non-ethernet port working, Just replace frame-relay with the name of your sdsl port: "Multirate HDSL2" http://community.zenoss.com/forums/viewtopic.php?t=1301 <http://community.zenoss.com/forums/viewtopic.php?t=1301&sid=0089653ff5e2b77 7891b9f948e66e910> &sid=0089653ff5e2b777891b9f948e66e910 To the folks at ZenOss - this should go into the FAQ. -g On 2/24/07, Valery V. Bobrov <[EMAIL PROTECTED]> wrote: Hello! I added device zyxel IES 2000 into the / <http://10.16.0.40:8080/zport/dmd/Devices> Devices / <http://10.16.0.40:8080/zport/dmd/Devices/Network> Network / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch> Switch / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yu govostok.transtk.ru> sdsl77da.yugovostok.transtk.ru I added mib files I can see graph for the uplink port. This is the fastEthernet port on page / <http://10.16.0.40:8080/zport/dmd/Devices> Devices / <http://10.16.0.40:8080/zport/dmd/Devices/Network> Network / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch> Switch / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yu govostok.transtk.ru> sdsl77da.yugovostok.transtk.ru / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yu govostok.transtk.ru/os> os / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yu govostok.transtk.ru/os/interfaces/Uplink%202> Uplink 2 Type is ethernetCsmacd When i enterred into the sdsl port / <http://10.16.0.40:8080/zport/dmd/Devices> Devices / <http://10.16.0.40:8080/zport/dmd/Devices/Network> Network / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch> Switch / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yu govostok.transtk.ru> sdsl77da.yugovostok.transtk.ru / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yu govostok.transtk.ru/os> os / <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yu govostok.transtk.ru/os/interfaces/gshdsl2> gshdsl2 There is no gpaph!! type os the sdsl interface Multirate HDSL2 I need graphs for sdsl intrerfaces Can anyone help me to solve this problem, please? Valery IpInterface Name gshdsl2 MAC Address 00:13:49:29:1E:CC Monitor True False IP Addresses Operational Status Up Administrative Status Up Type Multirate HDSL2 Speed 2304000 MTU 1500 SNMP Index 202 Description gshdsl2 <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yu govostok.transtk.ru/os/interfaces/gshdsl2> Range Hourly Daily Weekly Monthly Yearly Link graphs _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users -- Greg Haygood [EMAIL PROTECTED]
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
