I haven't had a problem with using the Copy method, so I'm not sure why it didn't work for you. But I'm glad you got it running!
On 2/24/07, Valery V. Bobrov <[EMAIL PROTECTED]> wrote:
Hi, Greg! Thank you for your help! as I wrote in previous message copy method did not work but I entered the parameters and value from "ethernetCsmacd<http://10.16.0.40:8080/zport/dmd/Devices/rrdTemplates/ethernetCsmacd>" to "Multirate HDSL2<http://10.16.0.40:8080/zport/dmd/Devices/rrdTemplates/Multirate%20HDSL2> " and it works I can see the graph ! Thank you But i cannot understand why copy method did not work? Valery ------------------------------ *From:* [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] *On Behalf Of *Greg Haygood *Sent:* Saturday, February 24, 2007 4:58 PM *To:* General discussion of using zenoss system *Subject:* Re: [zenoss-users] Problems with Graph SDSL interfaces I need HELP! Hi, Valery. This thread on the forum covers how to get the non-ethernet port working, Just replace frame-relay with the name of your sdsl port: "Multirate HDSL2" http://community.zenoss.com/forums/viewtopic.php?t=1301&sid=0089653ff5e2b777891b9f948e66e910 To the folks at ZenOss - this should go into the FAQ. -g On 2/24/07, Valery V. Bobrov <[EMAIL PROTECTED]> wrote: > > Hello! > > I added device zyxel IES 2000 into the / Devices<http://10.16.0.40:8080/zport/dmd/Devices>/Network<http://10.16.0.40:8080/zport/dmd/Devices/Network>/Switch<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch>/ > sdsl77da.yugovostok.transtk.ru<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yugovostok.transtk.ru> > I added mib files > I can see graph for the uplink port. This is the fastEthernet port > on page / Devices <http://10.16.0.40:8080/zport/dmd/Devices> / Network<http://10.16.0.40:8080/zport/dmd/Devices/Network>/Switch<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch>/ > sdsl77da.yugovostok.transtk.ru<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yugovostok.transtk.ru>/ > os<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yugovostok.transtk.ru/os>/Uplink 2<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yugovostok.transtk.ru/os/interfaces/Uplink%202> > Type is *ethernetCsmacd* > ** > When i enterred into the sdsl port / Devices<http://10.16.0.40:8080/zport/dmd/Devices>/Network<http://10.16.0.40:8080/zport/dmd/Devices/Network>/Switch<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch>/ > sdsl77da.yugovostok.transtk.ru<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yugovostok.transtk.ru>/ > os<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yugovostok.transtk.ru/os>/gshdsl2<http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yugovostok.transtk.ru/os/interfaces/gshdsl2> > *There is no gpaph!!* > *type os the sdsl interface *Multirate HDSL2 > > I need graphs for sdsl intrerfaces > > *Can anyone help me to solve this problem, please?* > > Valery > IpInterface Name gshdsl2 MAC Address 00:13:49:29:1E:CC Monitor True > False IP Addresses > Operational Status Up Administrative Status Up Type Multirate HDSL2 > Speed 2304000 MTU 1500 SNMP Index 202 Description > > gshdsl2 > <http://10.16.0.40:8080/zport/dmd/Devices/Network/Switch/devices/sdsl77da.yugovostok.transtk.ru/os/interfaces/gshdsl2> Range > Hourly Daily Weekly Monthly Yearly Link graphs > > > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users > -- Greg Haygood [EMAIL PROTECTED] _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
-- Greg Haygood [EMAIL PROTECTED]
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
