Hello Greg,
On Feb 23, 2007, at 10:11 AM, Greg Haygood wrote:
I'm nearly finished with the config to monitor an old F740. Attached
is the PerfConf XML for it. It's working fine, so you should be able
to drop it in. I would expect the OIDs to be the same with the newer
equipment, but if you find any issues, please let me know.
I've imported the RRDTemplate and renamed it to "NetApp" and
restarted zenperfsnmp. I'm still getting nothing. Sorry to sound
like a newbie, but what else do I need to do to get this template to
start making some pretty graphs?
Thanks,
Will
On 2/23/07, Will Froning <[EMAIL PROTECTED]> wrote:
Hello All,
I've been trying to configure Zenoss to monitor the protocol ops/sec
without any success. I know the OIDs, but I can't seem to get it to
graph anything. I created a sub-device and dropped my FAS3020
cluster in it (/Devices/Server/NetApp). I then created "Protocol" in
PerfConf for NetApp with the proper OIDs, but nothing is happening.
I also tried this same thing via individual PerfConf settings on each
of the filers with on success.
Any help is appreciated. The eventual interest is to watch as much
stuff as makes sense from the filers, but if I can't even get ops/sec
working I'm unlikely to get anything else.
Thanks,
Will
--
Will Froning
Sr. Systems Architect
American University of Sharjah
PO Box 26666
Sharjah, UAE
Tel: (9716) 515-2124
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
--
Greg Haygood
[EMAIL PROTECTED]
<RRDTemplate_NetApp_Device.xml>
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
--
Will Froning
Sr. Systems Architect
American University of Sharjah
PO Box 26666
Sharjah, UAE
Tel: (9716) 515-2124
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
