That should do it for you.
Kristopher Dick _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wesley.Sparks Sent: Friday, 09 March 2007 06:39 To: General discussion of using zenoss system Subject: RE: [zenoss-users] Graphing multi-link serialinterfaces/VLANsubinterfaces So under devices, PerfConf I would make a copy of ethernetCsmacd, remove PPP and rename the copy to PPP? Thanks From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kristopher D. Dick Sent: Thursday, March 08, 2007 11:12 AM To: 'General discussion of using zenoss system' Subject: RE: [zenoss-users] Graphing multi-link serial interfaces/VLANsubinterfaces You'll have to copy the Ethernet PerfConf over to your PPP PerfConf. Interesting that, despite ZenOSS being able to tell what kind of serial connection it's dealing with, it doesn't have built in PerfConf templates for at least the most common links. I have 2 cards in my 2811, one configured for propPointToPointSerial and the other for PPP. Copying over the Ethernet PerfConf worked for both. Kristopher Dick _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wesley.Sparks Sent: Thursday, 08 March 2007 09:02 To: General discussion of using zenoss system Subject: [zenoss-users] Graphing multi-link serial interfaces/VLAN subinterfaces I am not getting graphs on my serial links on my Cisco 3725 any reason? They are PPP multi-link interfaces does that pose an issue with graphing? I also have a VLAN sub interface it isn't graphing anything special I need to do to get these type of interfaces to graph? Any help would be great. Thanks
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
