Rob,
I had the same problem and i couldnt find a solution. Actually, to make
things worse, sometimes after i make the change, it periodically reverts
itself back to v1 and i cant find out why just yet.
I originally thought it was reverting certain devices back to v1 after i
did an ./zenperfsnmp run -v10 -d <device_name>. But i cant duplicate
it. I basically do my normal tinkering and anytime i get alot of "BAD
OID" events/messages in the zenperfsnmp.log file i check the zSnmpVer
and sure enough, its set back to v1. Very frustrating.
I think i am going to send a separate email to the zenoss dev mailing
list asking as a feature request to be able to toggle the Snmp Version
at the "Add Device" phase.
Does anyone know where the default setting is for the zSnmpVer field?
If i could set the default zSnmpVer to v2c, i would be in business.
Before anyone says it, the very first step i did was click on
Devices/zProperties, went down to the zSnmpVer field and set that to v2c
a long time ago, so that cant be where the "default" setting is. I know
this because if i add a device, it always adds it with v1 and i have to
go in afterwards and change it to v2c every time.
Thanks,
-Daniel
rgrijalvo wrote:
Hi All,
I'm hoping my logic is correct, but if someone could verify Zenoss' behavior
for the following, I'd really appreciate it.
I was under the impression that if I changed any of the zProperties for a
certain class, in this case, /Device/Network/Router, the changes would apply
for all devices within the class.
The parameter I am having issues with is zSnmpVer. Under the class router, I changed
it to v2. The path for this parameter is listed as /Network/Router. However, when I
go to the zProperties tab of a newly discovered device of class Router, the zSnmpVer
value is back to the default of v1. It does show a new path of
/Network/Router/devices/<device_name>. The new path does not really surprise
me, but I thought it would use what I defined at the Router class level.
Am I correct in my expectations? I modified the zCollectorCollectPlugins
parameter to exclude the RouteMap plugin and it propagated to all devices
discovered with that class.
Thanks everyone for their feedback.
Regards,
Rob-
-
-------------------- m2f --------------------
Read this topic online here:
http://community.zenoss.com/forums/viewtopic.php?p=4839#4839
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
