Daniel,
In stead of changing it on the device you need to delete its local
zProperty. This will allow the higher level one to set the value.
I think the problem is the local property overriding the one higher
up. You can delete the property at the bottom of the zProperties page.
-EAD
On Mar 22, 2007, at 9:00 AM, Daniel McKinney wrote:
Erik,
Not sure what you mean by bad device. Do you mean the devices that
are complaining about bad OIDs? The only time i get bad OID
messages (after i researched some more) is when i move a device
from one Monitor to my new custom one. When that occurs, the
zSnmpVer field gets reset to v1 and that is when the bad OIDs start.
Other than that, i still get the same problem Rob is having. I go
to a Class, set the zProperties' zSnmpVer to v2c and i still have
to manually go to each device beneath that Class and change the
zSnmpVer to v2c.
Thanks,
-Daniel
Erik A. Dahl wrote:
Hum,
Can you look on a bad device and see if the version has been
defined _just_ for that device? I wonder if the modeler is
messing this up. Shouldn't be.
-EAd
On Mar 21, 2007, at 7:47 AM, Daniel McKinney wrote:
Rob,
I had the same problem and i couldnt find a solution. Actually,
to make things worse, sometimes after i make the change, it
periodically reverts itself back to v1 and i cant find out why
just yet.
I originally thought it was reverting certain devices back to v1
after i did an ./zenperfsnmp run -v10 -d <device_name>. But i
cant duplicate it. I basically do my normal tinkering and
anytime i get alot of "BAD OID" events/messages in the
zenperfsnmp.log file i check the zSnmpVer and sure enough, its
set back to v1. Very frustrating.
I think i am going to send a separate email to the zenoss dev
mailing list asking as a feature request to be able to toggle the
Snmp Version at the "Add Device" phase.
Does anyone know where the default setting is for the zSnmpVer
field? If i could set the default zSnmpVer to v2c, i would be in
business.
Before anyone says it, the very first step i did was click on
Devices/zProperties, went down to the zSnmpVer field and set that
to v2c a long time ago, so that cant be where the "default"
setting is. I know this because if i add a device, it always
adds it with v1 and i have to go in afterwards and change it to
v2c every time.
Thanks,
-Daniel
rgrijalvo wrote:
Hi All,
I'm hoping my logic is correct, but if someone could verify
Zenoss' behavior for the following, I'd really appreciate it.
I was under the impression that if I changed any of the
zProperties for a certain class, in this case, /Device/Network/
Router, the changes would apply for all devices within the class.
The parameter I am having issues with is zSnmpVer. Under the
class router, I changed it to v2. The path for this parameter
is listed as /Network/Router. However, when I go to the
zProperties tab of a newly discovered device of class Router,
the zSnmpVer value is back to the default of v1. It does show a
new path of /Network/Router/devices/<device_name>. The new path
does not really surprise me, but I thought it would use what I
defined at the Router class level.
Am I correct in my expectations? I modified the
zCollectorCollectPlugins parameter to exclude the RouteMap
plugin and it propagated to all devices discovered with that
class.
Thanks everyone for their feedback.
Regards,
Rob-
-
-------------------- m2f --------------------
Read this topic online here:
http://community.zenoss.com/forums/viewtopic.php?p=4839#4839
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
