I don't see an attached file. Can you re-submit it? Thank you,
-gr jbobjensen at gmail.com wrote: > Folks, > > We ran into this problem recently and made a slight adjustment to the > InterfaceMap.py file that lives in: > > $ZENHOME/Products/DataCollector/plugins/zenoss/snmp > > I have attached the modified file. This is only applicable to certain Cisco > devices running CatOS. I have only tested with 6509s and 6513s. This fix > changes the interface names from the generic 10/100 utp ethernet to the > correct port number, but only the slot/port is listed, like 2/3. > > Make a copy of your InterfaceMap.py, then copy the attached InterfaceMap.py > to the path above. > > Then run the following against a device to test: zenmodeler run -v 10 -d > <yourdevicename> --collect='InterfaceMap' --force > > You have to use the --force option because zenmodeler will not remodel > devices that haven't changed. > > Let me know if this helps and if you run into any problems. > > BobJ > > -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=5526#5526 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [EMAIL PROTECTED] http://lists.zenoss.org/mailman/listinfo/zenoss-users
