After installing SNMP in Windows server 2003, you have to open up the "Services" MMC console, right-click the "SNMP Service", go to "Properties", then click on the "Security" tab.
I always remove the "public" community name, and add a standard "READ ONLY" community name we use in our environment. Then, below add the IP address of your zenoss box in the "Accept SNMP packets from these hosts" section. HTH, Chris Hillman Systems Administrator Clearwater Research, Inc. www.clearwater-research.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of master_wa Sent: Thursday, May 24, 2007 12:07 PM To: [email protected] Subject: [zenoss-users] Re: cannot see snmp on windows 2003 devices b3llb0y wrote: > I was able to get this working with 2003 server without issues. But I have to go into Services and Set the SNMP String. Once I did that it worked like a charm. hmm what do you mean by setting the snmp string? what did you set it to ------------------------ kyle wa -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=6728#6728 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
