Hello I'm having a bit of trouble creating some graphs on our Zenoss 1.1.2 system. I want to map the CPU temperature on some Compaq servers. The system temperatures are under OID 1.3.6.1.4.1.232.6.2.6.8.1.4.0. CPU1 is 1.3.6.1.4.1.232.6.2.6.8.1.4.0.1, CPU2 is 1.3.6.1.4.1.232.6.2.6.8.1.4.0.2, chassis is 1.3.6.1.4.1.232.6.2.6.8.1.4.0.3, etc.
If I tell it to use 1.3.6.1.4.1.232.6.2.6.8.1.4.0 then it tells me it is an Bad OID. If I map to the first OID 1.3.6.1.4.1.232.6.2.6.8.1.4.0.1 then it seems to give me a figure on the graph that is the sum of all the OIDs that hang off 1.3.6.1.4.1.232.6.2.6.8.1.4.0 What I need to do is make each one a seperate line of the graph or put each one onto a seperate graph. Then I want to set up a threshold on the CPU1 and CPU2 temperatures. I've got a similar problem with pulling at the Physical Drive status codes (these come from the Compaq agent OIDs). I want to set up a threshold so that I get a warning when any of the values underneath 1.3.6.1.4.1.232.3.2.5.1.1.6 is anything other than 2. I'm a little confused by the way this is working so any suggestions are greatfully received! ------------------------ Dave Lee -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=8591#8591 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
