Currently I am wokring on a zenpack that will enable that. It is still
in a rough beta stage. There are some forum posts where I provided the
like to the rough template....

Unfortunatly at this point there is a small about of patching that must
be done to the ZenModel in order to make this happen. 

In a previous post EAD said to integrate some of these components into
the Zen Model and submit patches.

I have some questions for everyone...\

What components would you like to see added for all zen devices, and
what attributes do you think should be available for discovery?

Here are my thoughts so far.

Temperature Sensors
        Critical Max
        Critical Min
        Warning Max
        Warning Min
        Description

Fans
        Critical Max RPM
        Critical Min RPM
        Warning Max RPM
        Warning Min RPM
        Description

Physical Disks
        RPM
        NexusID
        Type (As in regular device or spare disk)

Raid Arrays
        Size
        Description
        OSName
        Raid Level

Should I think about organization by Chassis?
        

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James Pulver
Sent: Thursday, September 27, 2007 6:31 AM
To: [email protected]
Subject: Re: [zenoss-users] Dell Hardware status

Searching the forum is useful. See if this helps:
http://community.zenoss.com/forums/viewtopic.php?p=6225#6225

--
James Pulver
Information Technology Area Supervisor
LEPP Computer Group
Cornell University



johanyg wrote:
> Hi,
> 
> First of all I want to say that I'm very pleased with Zenoss and it's
features. It's much easier and simpler to use than eg. Nagios.
> 
> I've installed OpenManage on my Dell Servers which returns a lot of
Hardware information over SNMP for example status of HW raid,
powersupplies, CPU, memory etc. It normally returns an 'ok' status when
things are running smoothly and 'critical' if something is wrong.
> 
> My questions are:
> - Is it possible to display raidstatus, powersupply-status etc on the
status-page for each server ? If yes - how do I do it ? :)
> - I need to be able to detect that a status has changed to 'ok' to
critical. Do you have a howto for this or do you have any good ideas ?
> 
> Thanks for a great product!
> 
> Sincerely,
> 
> Johan
> 
> ------------------------
> Johan Grasmo
> 
> 
> 
> 
> -------------------- m2f --------------------
> 
> Read this topic online here:
> http://community.zenoss.com/forums/viewtopic.php?p=11152#11152
> 
> -------------------- m2f --------------------
> 
> 
> 
> _______________________________________________
> zenoss-users mailing list
> [email protected]
> http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users


CONFIDENTIALITY NOTICE:

This e-mail contains confidential information and is intended only for the 
individual named. If you are not the named addressee, you should not 
disseminate, distribute or copy this e-mail. Please notify the sender 
immediately if you have received this e-mail by mistake and delete this e-mail 
from your system. E-mail cannot be guaranteed to be secure or error-free as 
information could be intercepted, corrupted, lost, destroyed, arrive late or 
incomplete, or contain viruses. Neither the sender nor CoBiz Financial and its 
subsidiaries accept liability for any errors or omissions in the contents of 
this message which arise as a result of e-mail transmission.
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Reply via email to