Now, the problem here may be related to the IP Address design of our internal
network (I inherited it).
We use 59.0.0.0/24 for our head office and then we use 59.0.x.0/24 for all
external sites. These sites are all connected via VPN over ADSL links.
So, the design goes like this.
Code:
59.0.0.0/24
|
--------------------------------------------------------------
| | |
59.0.1.0/24 59.0.2.0/24 59.0.3.0/24
Each of the external sites has a router with a VPN address of 59.0.x.201 and is
monitored by SNMP.
I've added a location for each of the sites and assigned the added devices to
each location and this has resulted in a perfectly acceptable Google Map. (As
can be seen here)
The problem is, I can't figure out how I would create the map links between
locations.
So far, I've added 59.0.0.0/24 as a network and added each of the subnets under
this network, but this hasn't worked. It also doesn't appear to be adding in
the .201 routers to the networks as an IP Address or, in the few cases it has,
it adds it as no device, despite the fact a device exists. Have I maybe chosen
the wrong class for the VPN devices. I chose the Networks/Routers class.
Any ideas?
------------------------
Kevin Pascoe
-------------------- m2f --------------------
Read this topic online here:
http://community.zenoss.com/forums/viewtopic.php?p=11888#11888
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
