Select the interface you just added, Add a /manage to the end of the URL. This will bring up the Zope Interface. Select the properties tab in the upper right hand corner of the webpage. In the type field enter ethernetCsmacd_64, select save. Go back into that device in zenoss and push changes. (This should only be an issue if you are manually adding interfaces)
Does that help? P -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ninja007 Sent: Tuesday, November 06, 2007 3:14 PM To: [email protected] Subject: [zenoss-users] Re: Confused about templates pmorton wrote: > The way that performance graphs work are as follows; > > The Device template is applied to all new devices by default. (you can > override this by binding the template. > > For device components they are done by type. If you select the component > in the web browser (The interface) you will see the type listed as > ethernetCsmacd_64 or ppp or ds1 or any multitude of other device types. > In order to automatically monitor any device under you need to create a > new template called (the type name) in your case ethernetCsmacd_64 or > ethernetCsmacd on /devices/server/linux/fancy. Now all devices under > /devices/server/linux/fancy will be monitored with the new > ethernetCsmacd template. > > Paul > > Thanks Paul, Ah, that helped on my confusion. But then i think my problem might be elsewhere... The device have some interfaces on Counter32 that gets discovered when i add the device. Now, i have 6 more interfaces that i can find with enterprise.x.x.x.x and so on. When i add another interface under Interfaces : Device/Server/Linux/mydevices/mydevice/os Zenoss automatic thinks this is a Counter32 interface and bind the ethernetCsmacd template for that interface. If i reset binding i get an error : "You are already using the default values." If i try to bind and select ethernetCsmacd_64 zenoss locks up and hang. I checked the logs if there is any error when i try to bind but nothing. Is there some way to add the interface and tell what template to use? -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=12827#12827 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users CONFIDENTIALITY NOTICE: This e-mail contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately if you have received this e-mail by mistake and delete this e-mail from your system. E-mail cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Neither the sender nor CoBiz Financial and its subsidiaries accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
