On 29/02/2008, Chet Luther <[EMAIL PROTECTED]> wrote: > > On Feb 28, 2008, at 6:42 PM, febelus wrote: > > > If two devices in the same network are in different mappable > > Locations, a line will be drawn on the map. OK. But i need link > > between different device on different network connect trough VPN . > > Is possible??? > > > You can manually build links between the locations by setting up fake > VPN interfaces on your VPN endpoints. I've done this in a few cases to > solve exactly the problem you propose. I usually use an unused portion > of to 10/8 network to build these fake interconnections. > > Go to the device that is on one side of the VPN: > 1. Click on the OS tab > 2. Click the menu for the Interfaces and choose to add a new one > 3. Name it vpn0 (or whatever you want) > 4. Put "10.254.254.1/30" into the IP addresses field > 5. Set the operational and administrative status to up > 6. Set the type to "fakeVpnInterface" > 7. Set the monitor flag to false > > Go to the device that is on the other side of the VPN: > 1. Repeat steps 1-3 from above > 2. Put "10.254.254.2/30" into the IP addresses field > 3. Repeat steps 5-7 from above > > You can do this for each of your VPNs. Just be sure to use a > different /30 network for each tunnel. For example, the next VPN after > this one would use 10.254.254.5/30 and 10.254.254.6/30 because you > must account for the netid and broadcast IPs. > > This worked for me, however I ran into an oddity.
I have the zProperties of Networks set to 16 and 29. Entering the first address above (10.254.254.1/30) was fine, but the second (10.254.254.2/30) was automagically changed to /29. Similar things happened to other addresses. I ended up trying to put them all as /29, but the first one is stuck at /30. I'm using 2.1.71 installed from source. -- Regards, Graham Bloice
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
