i'm rather new to zenoss too, but as a network analyst i can tell you that if your device does not have an Ip address you'll have a very hard time identifying it. hubs typically are not managed devices as they only forward traffic. switches typically can be setup with or without an Ip address. if you want ot manage it say with zenoss console to the device with a serial cable or whatever method is specified and get the IP, or assign one to it. then you can discover via zenoss. as for your modem, i'm not real sure you're going to be able to monitor that. however if you have a router that's snmp capable you can monitor through that and it's kind of like monitoring the modem. when i first installed i couldn't see the map or perfs. try installing flash on whatever computer you're working off of. that fixed me. you're on your own wtih the MIB's. best way is via snmpwalk, or you can use a program called the dude from microtik which has a pretty good graphical snmpwalk. i do not however know how to import an entire MIB tree into zenoss. not sure it can even be done.
hope that helps you a little. -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=17875#17875 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
