makemorebeer wrote: > the only specific information in the snmp trap (there are two of them that > come in) is the actual OIDs. it just says snmp-trap (oid goes here)
That should be easy then, try this, you will need to remove any mappings that are in place already for the 2 events: Events -> Cisco -> Sub Classes Pull Down: New Organizer -> ID = Latency_on_off -> OK Navigate to a device that has the bad /unknown snmptrap (OID) listed in the events: Tick box for that event -> Pull Down: Map event to class -> /cisco/Latency_on_off -> OK zProperties -> zEventSeverity -> Error Navigate to a device that has the OK/clear /unknown snmptrap (OID) listed in the events: Tick box for that event -> Pull Down: Map event to class -> /cisco/Latency_on_off -> OK zProperties -> zEventSeverity -> Clear The "clear" trap will clear any other traps created under the same organizer, so be careful not to add any other event mappings under that organizer that should not be cleared by the clear trap! -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=21776#21776 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
