Hi, I'm using V 2.2.3 and everything seems to work fine except that nothing shows up in Hardware Tab for Cisco Devices (Router). I can see all the interfaces and it graphs right....
Also I'm able to snmpwalk the slots and module information for a particular device. snmpwalk -v1 -cm24398jg894ghj9vsnvsiu a.b.c.d .1.3.6.1.4.1.9.3.6.11.1.3 SNMPv2-SMI::enterprises.9.3.6.11.1.3.4 = STRING: "Catalyst 6000 supervisor 2" SNMPv2-SMI::enterprises.9.3.6.11.1.3.5 = STRING: "Policy Feature Card 2" SNMPv2-SMI::enterprises.9.3.6.11.1.3.6 = STRING: "Cat6k MSFC 2 daughterboard" SNMPv2-SMI::enterprises.9.3.6.11.1.3.7 = STRING: "8 port 1000mb GBIC Enhanced QoS" SNMPv2-SMI::enterprises.9.3.6.11.1.3.8 = STRING: "48 port 10/100 mb RJ45" SNMPv2-SMI::enterprises.9.3.6.11.1.3.9 = STRING: "FlexWan" SNMPv2-SMI::enterprises.9.3.6.11.1.3.10 = STRING: "Serial T3 Port Adapter" SNMPv2-SMI::enterprises.9.3.6.11.1.3.12 = STRING: "Catalyst 6000 supervisor 2" SNMPv2-SMI::enterprises.9.3.6.11.1.3.13 = STRING: "Policy Feature Card 2" SNMPv2-SMI::enterprises.9.3.6.11.1.3.14 = STRING: "Cat6k MSFC 2 daughterboard" I want to monitor the memory usage on FlexWan module and I'm unable to see the hardware/module information. Any help in the right direction would be of great help! Thanks much! -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=23557#23557 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
