Does it have smth with my question, posted at this weekend to the dev
mailling list?
I'll repeat it here.
I'm trying to read last value for some variable collected by performance
daemon through http interface via call to getRRDValue?dsname=ifHCInOctets.
When I decided to check it by comparing returned values with those,
written under the graph for interface Throughput in Zenoss, I mentioned
that sometimes this value
does not coincide with the one returned by getRRDValue. I've also
captured this info from rrd file. The behavior is very strange - for 5
minutes this values are identical,
than next 5 minutes they a not. It seams that getRRDValue uses some
different calculation or different time interval sometimes. Which value
is correct and how to read it via http call?
James Pulver wrote:
I believe it's in the create RRD settings in graph definitions.
--
James Pulver
Information Technology Area Supervisor
LEPP Computer Group
Cornell University
Florian Petry wrote:
All,
I have an easy question:
We changed the collector to fetch SNMPperfstats every 60 seconds, but
the RRD graphs are still updated on a 5 minute basis.
Where is the parameter for the RRD files?
Thanks in advance,
Florian
------------------------------------------------------------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
