Kingpin, not meaning to hijack your thread here but thought this may help you and others and flows with the topic. Hope you don't mind.
I looked at the device dependency using transform. How do I add more than one since it looks like you can only do one transform? I need to add many of these as I have a large network. For instance, from Zenoss, router1 is first. Router2 is second, Router3 is third. If router1 is down via ping, I want router2 and router3 to show unknown or some other status such as debug since Zenoss wouldn't know the state of those. Thought to make them unknown but I settled on debug since there wasn't an unknown in the available status selections. Along with that was if the dependent router, i.e. router2 or 3, saw that the upstream router was down I would set the evt.severity as debug so I and the techs wouldn't get emails for them being down (critical). Got a ton of emails (since critical event) from the downstreams today when we brought one of the upstream down for a repair. Thanks, tk -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=27362#27362 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
