What version of Zenoss are you using? I believe this is a known issue with 2.3.3 and earlier, I'm not sure if this was fixed in 2.4, though it is on the roadmap IIRC. -- James Pulver Information Technology Area Supervisor LEPP Computer Group Cornell University
nsalemme wrote, On 5/11/2009 1:43 PM: > I have a set of devices the use snmp port 8001 instead of the default 161. I > have defined a new device class with zSnmpPort=8001 and placed these devices > in that device class. When I create a performance template, and test an OID, > the test host does not respond because it does not look like it's using the > port specified in the zProperties. > > I thought maybe it was just an error with the test function built into the > performance template tool, so I then binded the template to a host and > re-modeled the host. Even this returns an error too saying the OID is bad. > I know the host is setup to respond because I am able to query via the > command line by: > > snmpwalk -v2c -c <community string> <IP:port> <OID> > > This works. Does anyone know if zSnmpPort is broken in the SNMP performance > monitor? Is anyone successfully using Zen to monitor a host that does not > use port 161. > > > Thanks much in advance! > > > > > -------------------- m2f -------------------- > > Read this topic online here: > http://forums.zenoss.com/viewtopic.php?p=34622#34622 > > -------------------- m2f -------------------- > > > > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
