Okay, this is where my SNMP experience / lack of hurts me. I am reading as much
as I can but still confused. I have the MIBs loaded from Liebert and understand
the idea of creating a template for the device - but how do I walk the device
to find the appropriate OID for the MIB, ie: current temp, humidity, etc. When
I use the snmpwalk command this is all I get:
Code:
Command: snmpwalk -v1 -c${device/zSnmpCommunity} ${here/manageIp} system
Description: Display the OIDs available on a device
Output:
==== XXX.XXX.XXX.XXX ====
snmpwalk -v1 -cliebertMon XXX.XXX.XXX.XXX system
SNMPv2-MIB::sysDescr.0 = STRING: Environmental Control System for Rhoades Data
Center
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.476.1.42
SNMPv2-MIB::sysUpTime.0 = Timeticks: (168695) 0:28:06.95
SNMPv2-MIB::sysContact.0 = STRING: My Name
SNMPv2-MIB::sysName.0 = STRING: Rhoades Liebert DS
SNMPv2-MIB::sysLocation.0 = STRING: Office Location
SNMPv2-MIB::sysServices.0 = INTEGER: 72
DONE in 0 seconds on 1 targets
Thanks, Erik
-------------------- m2f --------------------
Read this topic online here:
http://forums.zenoss.com/viewtopic.php?p=38321#38321
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
