You probably need to check the SNMP permissions, either that or it's not
exposing anything you want via SNMP...
--
James Pulver
Information Technology Area Supervisor
LEPP Computer Group
Cornell University
erikk wrote, On 8/24/2009 4:06 PM:
> Okay, this is where my SNMP experience / lack of hurts me. I am reading as
> much as I can but still confused. I have the MIBs loaded from Liebert and
> understand the idea of creating a template for the device - but how do I walk
> the device to find the appropriate OID for the MIB, ie: current temp,
> humidity, etc. When I use the snmpwalk command this is all I get:
>
>
> Code:
> Command: snmpwalk -v1 -c${device/zSnmpCommunity} ${here/manageIp} system
> Description: Display the OIDs available on a device
> Output:
> ==== XXX.XXX.XXX.XXX ====
> snmpwalk -v1 -cliebertMon XXX.XXX.XXX.XXX system
> SNMPv2-MIB::sysDescr.0 = STRING: Environmental Control System for Rhoades
> Data Center
> SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.476.1.42
> SNMPv2-MIB::sysUpTime.0 = Timeticks: (168695) 0:28:06.95
> SNMPv2-MIB::sysContact.0 = STRING: My Name
> SNMPv2-MIB::sysName.0 = STRING: Rhoades Liebert DS
> SNMPv2-MIB::sysLocation.0 = STRING: Office Location
> SNMPv2-MIB::sysServices.0 = INTEGER: 72
> DONE in 0 seconds on 1 targets
>
>
>
> Thanks, Erik
>
>
>
>
> -------------------- m2f --------------------
>
> Read this topic online here:
> http://forums.zenoss.com/viewtopic.php?p=38321#38321
>
> -------------------- m2f --------------------
>
>
>
> _______________________________________________
> zenoss-users mailing list
> [email protected]
> http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
