More of a work around, but you can always set up an AP that is behind
chilispot or some other captive portal for people who are not on the
windows domain. Makes configuring client machines much simpler.

On Sun, Oct 10, 2010 at 4:04 PM, Victor Hugo dos Santos
<[email protected]> wrote:
> Hello,
>
> I have a server with zentyal (last version) installed with PDC and
> RADIUS services's configured and APs configured to authenticate usters
> with WPA.
>
> In the Windows 7, I add a new configuration in the "wireless network
> manager" with the SSID + WPA
> after this, I change the advance configuration to choice "EAP-TTLS"
> and disable the "validate certificate verification"
> and for last, in this "Configuration" of EAP-TTLS I select "Use the
> username and password of Windows".
>
> so.. with this configuration, the Windows 7 connect fine with the APs.
>
> but, If I change "Use the username and password of Windows" for
> "Request username and password", Windows 7 can't connect to network.
>
> I tried with "user+pass", "domain\user+pass" and various other
> combination with success.
>
> In the freeradius log's the only difference is in the User-Name:
>
> ===================
>        Message-Authenticator = 0x9ac0d094zxzxzxz42e0a20dbfc731f9d9e5a22c
>        Service-Type = Framed-User
>        User-Name = "mrios"
>        Framed-MTU = 1488
>        Called-Station-Id = "00-22-B0-5F-XX"
>        Calling-Station-Id = "5C-AC-4C-XX-XX-XX"
>        NAS-Identifier = "D-Link Access Point"
>        NAS-Port-Type = Wireless-802.11
>        Connect-Info = "CONNECT 54Mbps 802.11g"
>        EAP-Message = 0x0200000a016d72696f73
>        NAS-IP-Address = 192.168.1.XX
>        NAS-Port = 1
>        NAS-Port-Id = "STA port # 1"
> ====================
>
> because, when I select the "use the user and password of windows" the
> "User-Name" show the username...
> but, If I select "Request the user and password" the "User-Name" in
> the log is empty !!  :(
>
> I find a alternative to use Wifi with WPA protocol with users that
> don't are in the windows domain.
>
> so... what is bad ?? the syntax in the "username" (maybe the correct
> is the "u...@domain+password) ?? other ??
>
> thanks
>
> --
> --
> Victor Hugo dos Santos
> Linux Counter #224399
> _______________________________________________
> zentyal-users mailing list
> [email protected]
> http://lists.zentyal.org/cgi-bin/mailman/listinfo/zentyal-users
>



-- 
Random quote of the week/month/whenever i get to updating it: "Quis custodiet
ipsos custodes?": "who shall watch the watchers themselves?" - Juvenal
_______________________________________________
zentyal-users mailing list
[email protected]
http://lists.zentyal.org/cgi-bin/mailman/listinfo/zentyal-users

Reply via email to