On 11/14/08 04:29, Tobias Exner wrote:
> Hi experts,
>
> I need a little help from your site to understand what's going on.
>
>
> I've got a SUN X4540 Thumper and setup some zpools. Further I engaged
> the powerd configuration to stop the disks when there are idle for a
> specified time.
>
>
> Now I noticed that all disks come up once in an hour due to the fmd
> scanning the disks or the zpools. And here's my problem. Which module of
> fmd is responsible for that?
Tobias,
It is probably the "disk-transport" module.
It scans the disks once an hour looking for errors I believe.
> Is there a possibility to configure or stop
> the regarding part of the fmd?
>
You can try unloading the module:
"fmadm unload disk-transport"
You should also be able to configure the scan interval by adding
an entry to /usr/lib/fm/fmd/plugins/disk-transport.conf file. i.e.
setprop interval 24h
You need to restart fmd or unload/reload the module for this to take effect.
-tarik
> I read through the fmd documentation but can't find a appropriate info.
>
> regards,
>
> Tobias
> _______________________________________________
> fm-discuss mailing list
> [EMAIL PROTECTED]
>
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
