Tarik, thank you.
I did some tests and that's the solution.. regards, Tobias Exner Tarik Soydan - Sun BOS Software schrieb: > On 11/14/08 04:29, Tobias Exner wrote: >> Hi experts, >> >> I need a little help from your site to understand what's going on. >> >> >> I've got a SUN X4540 Thumper and setup some zpools. Further I engaged >> the powerd configuration to stop the disks when there are idle for a >> specified time. >> >> >> Now I noticed that all disks come up once in an hour due to the fmd >> scanning the disks or the zpools. And here's my problem. Which module >> of fmd is responsible for that? > Tobias, > > It is probably the "disk-transport" module. > It scans the disks once an hour looking for errors I believe. >> Is there a possibility to configure or stop the regarding part of the >> fmd? >> > > You can try unloading the module: > "fmadm unload disk-transport" > > You should also be able to configure the scan interval by adding > an entry to /usr/lib/fm/fmd/plugins/disk-transport.conf file. i.e. > > setprop interval 24h > > You need to restart fmd or unload/reload the module for this to take > effect. > > -tarik > >> I read through the fmd documentation but can't find a appropriate info. >> >> regards, >> >> Tobias >> _______________________________________________ >> fm-discuss mailing list >> [EMAIL PROTECTED] >> > > _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
