Hi Paul,
Example 11-1 in this section describes how to replace a
disk on an x4500 system:
http://docs.sun.com/app/docs/doc/819-5461/gbcet?a=view
Cindy
On 01/09/10 16:17, Paul B. Henson wrote:
On Sat, 9 Jan 2010, Eric Schrock wrote:
If ZFS removed the drive from the pool, why does the system keep
complaining about it?
It's not failing in the sense that it's returning I/O errors, but it's
flaky, so it's attaching and detaching. Most likely it decided to attach
again and then you got transport errors.
Ok, how do I make it stop logging messages about the drive until it is
replaced? It's still filling up the logs with the same errors about the
drive being offline.
Looks like hdadm isn't it:
r...@cartman ~ # hdadm offline disk c1t2d0
/usr/bin/hdadm[1762]: /dev/rdsk/c1t2d0d0p0: cannot open
/dev/rdsk/c1t2d0d0p0 is not available
Hmm, I was able to unconfigure it with cfgadm:
r...@cartman ~ # cfgadm -c unconfigure sata1/2::dsk/c1t2d0
It went from:
sata1/2::dsk/c1t2d0 disk connected configured failed
to:
sata1/2 disk connected unconfigured failed
Hopefully that will stop the errors until it's replaced and not break
anything else :).
No, it's fine. DEGRADED just means the pool is not operating at the
ideal state. By definition a hot spare is always DEGRADED. As long as
the spare itself is ONLINE it's fine.
The spare shows as "INUSE", but I'm guessing that's fine too.
Hope that helps
That was perfect, thank you very much for the review. Now I can not worry
about it until Monday :).
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
