Hi everyone, Due to some weird interaction with other network equipment we need to run our network interface with a mtu of 1400. This is very easy to change for a physical interface on boot, you just edit the /etc/hostname.interface file and add the appropriate flags.
But how do you do this with an interface that is brought up by zoneadm. At bootup the system looks like this rtls0: flags=1001000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,FIXEDMTU> mtu 1400 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 After I bring up the zone it looks like this rtls0: flags=1001000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,FIXEDMTU> mtu 1400 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 rtls0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 zone test inet 192.168.1.7 netmask ffffff00 broadcast 192.168.1.255 Then I manually have to set the mtu on rtls0:1. I don't seem to be able to specify this in zonecfg and so far the only solution I have is to manually set it. Any suggestions? cheers, Nickus _______________________________________________ zones-discuss mailing list zones-discuss@opensolaris.org