Good Morning!

I am trying to get a branded zone set up with a virtual NIC and things are
not going very well.  I have a machine with two available ip addresses and
one nic.  I have 64.85.164.140 and 64.85.164.141

a...@machine:~$ dladm show-link
LINK        CLASS    MTU    STATE    OVER
iprb0       phys     1500   up       --
vnic0       vnic     1500   up       iprb0

a...@machine:~$ dladm show-vnic
LINK         OVER         SPEED  MACADDRESS           MACADDRTYPE        
VID
vnic0        iprb0        10     2:8:20:d:bb:25       random              0

a...@machine:~$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
        inet 127.0.0.1 netmask ff000000 
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
        zone buildz
        inet 127.0.0.1 netmask ff000000 
iprb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 64.85.164.140 netmask fffff000 broadcast 64.85.175.255
vnic0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask 0 
vnic0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index
3
        zone buildz
        inet 64.85.164.141 netmask fffff000 broadcast 64.85.175.255
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
        inet6 ::1/128 
lo0:1: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu
8252 index 1
        zone buildz
        inet6 ::1/128 
iprb0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
        inet6 fe80::21c:c0ff:fe84:7e0d/10 


a...@machine:~$ pfexec zonecfg -z buildz
zonecfg:buildz> export
create -b
set zonepath=/export/zones/buildz
set brand=lx
set autoboot=false
set ip-type=shared
add net
set address=64.85.164.141/20
set physical=vnic0
set defrouter=64.85.160.1
end
zonecfg:buildz> exit


network connectivity is not working at all, although the interface does
show up in the zone.

ideas?  Once I get it working I'm going to document it in full on my
website for other lost souls trying to do the same, it seems like there is
a lot of outdated information about crossbow out there ;).


Thanks!
-- Alex
_______________________________________________
zones-discuss mailing list
zones-discuss@opensolaris.org

Reply via email to