On Tue, Dec 22, 2009 at 9:34 PM, Mike Gerdts <mger...@gmail.com> wrote:
> On Tue, Dec 22, 2009 at 8:02 PM, Mike Gerdts <mger...@gmail.com> wrote:
>> I've been playing around with zones on NFS a bit and have run into
>> what looks to be a pretty bad snag - ZFS keeps seeing read and/or
>> checksum errors.  This exists with S10u8 and OpenSolaris dev build
>> snv_129.  This is likely a blocker for anything thinking of
>> implementing parts of Ed's Zones on Shared Storage:
>> http://hub.opensolaris.org/bin/view/Community+Group+zones/zoss
>> The OpenSolaris example appears below.  The order of events is:
>> 1) Create a file on NFS, turn it into a zpool
>> 2) Configure a zone with the pool as zonepath
>> 3) Install the zone, verify that the pool is healthy
>> 4) Boot the zone, observe that the pool is sick
> [snip]
> An off list conversation and a bit of digging into other tests I have
> done shows that this is likely limited to NFSv3.  I cannot say that
> this problem has been seen with NFSv4.

I have been able to reproduce this with NFSv4 on build 130.  Taking
the discussion to the zfs list...

Mike Gerdts
zones-discuss mailing list

Reply via email to