I have a problem with my Welltech Wellgates. I can't call any extension which starts with or includes * or #. When dialing it responds fine but after some seconds I just get a busy tone and on the Asterisk console it says "SIP/2.0 484 Address Incomplete".
Don't know if it connects to the DTMF payload type. Yesterday I made som different tests and observed that if DTMF payload type was set to 96 (default) on my Wellgate, Asterisk responded with "NOTICE[606227]: File rtp.c, Line 417 (ast_rtp_read): Unknown RTP codec 96 received" I then tried to set it to 101 (found this value somewhere on the net) and verified that voice responds now worked, but I don't know if this is the correct type? Still I can't use * or # regards Mickey Binder _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users