set silencethreshold to 50 and before voicemail call responsetimeout,0 regards Martin
On Wed, 17 Sep 2003, Christian Hecimovic wrote: > Hi Martin, > > Yes, silence detection in voicemail is working. I am using Voicemail2 with the > silencethreshold set to 256. However, the line doesn't hang up after the > silence is detected; instead, Voicemail2 exits after recording the voicemail > correctly, and Asterisk loops back into the main menu as if the # key was > pressed because the channel is still alive. Then it times out after 15 > seconds, as you can see below. > > >From extensions.conf: > > [incoming] > exten => s,1,Answer > exten => s,2,DigitTimeout,5 > exten => s,3,ResponseTimeout,10 > exten => s,4,BackGround(corp_greeting) > include => locals > include => errors > > The locals context consists of macros which look like this: > > exten => s,1,Playback(transfer,skip) > exten => s,2,Dial(${ARG2},20) > exten => s,3,Voicemail2(u${ARG1}) > exten => s,4,Goto(incoming,s,1) > exten => s,103,Voicemail2(b${ARG1}) > exten => s,104,Goto(incoming,s,1) > > So after a voicemail is left, there is a Goto back into the incoming context. > It all works great, except for when the line gets tied up by the DigitTimeout > and ResponseTimeout bits when hangups aren't detected. > > I've tried using BUSYDETECT_MARTIN with busydetect=yes and it didn't work. The > channel stays up after the outside caller hangs up. > > Since all of our inside phones are SIP lines, there is no problem detecting > hangups when a voice conversation is taking place, since Asterisk obviously > detects SIP hangups correctly whether it's SIP to SIP or SIP to outside line. > The problem is really only when outside callers leave voicemail. > > Thanks, > > Chris > > On Wednesday 17 September 2003 08:09, Martin Pycko wrote: > > Do you have silence in the channel when the remote user hangs up or busy > > tone ? > > > > If you have silence you can use maxsilence=x_seconds in voicemail.conf > > with > > Voicemail2 application and that will make sure the calls are hanged up > > after x_seconds of silence in the channel. > > > > If you have busy tone then use the busydetect=yes in zapata.conf. > > You can also limit the length of the voicemail message with > > maxmessage=x_seconds in the voicemail.conf > > > > regards > > Martin > > > > On Tue, 16 Sep 2003, Christian Hecimovic wrote: > > > Hi, > > > > > > Try as I might, I can't get hangups detected on a Zap channel with loop > > > start lines. So, after someone leaves a voicemail and then hangs up, > > > Asterisk doesn't know it, exits VoicemailMain2, and loops back to the > > > corporate greeting, tying up the line even though the outside caller has > > > hung up. > > > > > > Therefore, I've added the following hideous hack - er, code - to > > > voicemail2.c. It starts right after the call to play_and_record() in > > > leave_voicemail(). > > > > > > if (res != '#' && chan != NULL && !strncmp(chan->name, "Zap", 3)) { > > > /* Hang up the Zap channel only */ > > > ast_softhangup(chan, AST_SOFTHANGUP_EXPLICIT); > > > } > > > > > > Obviously, it hangs up the channel after the voicemail has been recorded, > > > if the # key wasn't pressed, if the channel still exists, and if it's a > > > Zap channel. I couldn't see a way to do this with AGI. > > > > > > Question: is this safe? I used a soft hangup because the channel is > > > controlled by another thread. I also modified channel.c so that > > > ast_channel_free() sets chan to NULL after it's freed, just in case. Is > > > there anything else I should be aware of? The code seems to work in my > > > testing, resulting in a proper hangup right after the voicemail has been > > > recorded. I'm not up on my Asterisk internals, so I'm not totally > > > confident about this. > > > > > > Thanks, > > > > > > Chris > > > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users