Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> on November 11, 2005 at 10:10 AM -0400 wrote: set the keepalive to 60 or more OK. I set this to 120 that phone should not be able to display a hint status so speeddial = 500,500 Thanks. I've made the change The log could be more verbose than this. Set debug = 10 in your sccp.conf or in the console sccp debug 10 You should see what is happening with your audio stream I did this in the console and the output is below. It does not seem to say much to me about audio. Cheers, Gervais --------------------------------------------------------------------------------------------------------------------------- Asterisk Ready. *CLI> sccp debug 10 -- SEP003080629796: Old session marked down -- SEP003080629796: Killing Session 192.168.1.440|20|tr") in new stack -- SCCP: Looking for line 140eate a channel type=SCCP, format=256, data="" options= -- SCCP: Asterisk asked for the state (5) of the line 140 -- SEP003080629796: found line 140 -- SEP003080629796: New channel number: 1 on line 140 -- SEP003080629796: Global Capabilities: 268 -- SEP003080629796: format request: 4/4 -- SEP003080629796: Channel SCCP/140-00000001, capabilities: DEVICE 0x4 (ulaw) NATIVE 0x4 (ulaw) BEST 4 (ulaw) -- SEP003080629796: Allocated asterisk channel 140-1 -- SEP003080629796: Asterisk request to call SCCP/140-00000001 -- SEP003080629796: Set callingParty Name TLS Group on channel 1 -- SEP003080629796: Set callingParty Number 500 on channel 1 -- SEP003080629796: Set calledParty Name "TLS Group" on channel 1 -- SEP003080629796: Set calledParty Number 140 on channel 1 -- SEP003080629796: getting the active channel on device -- SEP003080629796: Indicate SCCP state (Ringing) on call 140-1 -- SEP003080629796: Send and Set the call state Ringing(4) for 140-1 -- SEP003080629796: Send callinfo for Inbound channel 1 -- SEP003080629796: Send lamp mode LampBlink(5) on line 1 -- SEP003080629796: Send ringer mode Outside(3) on device -- SEP003080629796: Set asterisk state Ringing (5) for call 1 -- SEP003080629796: Finish to indicate state SCCP (Ringing), SKINNY (Ringing) on call 140-1 -- Called 140 -- SCCP: Looking for line 140 -- SEP003080629796: found line 140 -- SEP003080629796: Looking for a channel with state "Ringing" (4) on device -- SEP003080629796: Looking for a channel with state "Ringing" (4) on line 140 -- SEP003080629796: Found channel (1) with state "Ringing" (4) on line 140 -- SEP003080629796: Found channel (1) with state "Ringing" (4) on device -- SCCP: Asterisk asked for the state (6) of the line 140 -- SCCP/140-00000001 is ringing -- SEP003080629796: >> Got message OffHookMessage -- SEP003080629796: getting the active channel on device -- SEP003080629796: Taken Offhook -- SEP003080629796: Looking for a channel with state "Ringing" (4) on device -- SEP003080629796: Looking for a channel with state "Ringing" (4) on line 140 -- SEP003080629796: Found channel (1) with state "Ringing" (4) on line 140 -- SEP003080629796: Found channel (1) with state "Ringing" (4) on device -- SEP003080629796: getting the active channel on device -- SEP003080629796: Answer the channel 140-1 -- SEP003080629796: Set the active channel 1 on device -- SEP003080629796: Send the active line 140 -- SEP003080629796: Indicate SCCP state (Connected) on call 140-1 -- SEP003080629796: Send ringer mode RingOff(1) on device -- SEP003080629796: Send speaker mode 1 -- SEP003080629796: Stop tone on device -- SEP003080629796: Send lamp mode LampOn(2) on line 1 -- SEP003080629796: Send and Set the call state Connected(5) for 140-1 -- SEP003080629796: Send callinfo for Inbound channel 1 -- SEP003080629796: readformat 4, payload 4 -- SEP003080629796: Ask the device to open a RTP port on channel 1. Codec: G.711 u-law 64k, echocancel: ON -- SEP003080629796: Starting RTP on channel 140-1 -- SEP003080629796: Creating rtp server connection at 192.168.1.125 -- SEP003080629796: Set asterisk state Up (6) for call 1 -- SEP003080629796: Finish to indicate state SCCP (Connected), SKINNY (Connected) on call 140-1 -- SCCP: Looking for line 140 -- SEP003080629796: found line 140 -- SEP003080629796: Looking for a channel with state "Ringing" (4) on device -- SEP003080629796: Looking for a channel with state "Ringing" (4) on line 140 -- SCCP: Asterisk asked for the state (2) of the line 140 -- SCCP/140-00000001 answered SIP/500-59ab -- SCCP: Asterisk request to hangup Inbound channel SCCP/140-00000001 -- SEP003080629796: Close openreceivechannel on channel 1 -- SEP003080629796: Stopping RTP on channel 140-1 -- SEP003080629796: Stop media transmission on channel 1 -- SEP003080629796: Requesting CallStatisticsAndClear from Phone -- SEP003080629796: Current channel 140-1 state Connected(5) -- SEP003080629796: getting the active channel on device -- SEP003080629796: Sending tone Zip (50) -- SEP003080629796: Indicate SCCP state (OnHook) on call 140-1 -- SEP003080629796: Send speaker mode 2 -- SEP003080629796: Send and Set the call state OnHook(2) for 140-1 -- SEP003080629796: Send lamp mode LampOff(1) on line 1 -- SEP003080629796: Stop tone on device -- SEP003080629796: Send date/time -- SEP003080629796: Finish to indicate state SCCP (OnHook), SKINNY (OnHook) on call 140-1 -- SEP003080629796: Deleting channel 1 from line 140 -- SEP003080629796: Deleted channel 1 from line 140 == Spawn extension (default, 140, 1) exited non-zero on 'SIP/500-59ab' -- SCCP: Looking for line 140 -- SEP003080629796: found line 140 -- SCCP: Asterisk asked for the state (1) of the line 140 -- SEP003080629796: >> Got message OnHookMessage -- SEP003080629796 is Onhook -- SEP003080629796: getting the active channel on device -- SEP003080629796: Send speaker mode 2 -- SEP003080629796: Stop tone on device |
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users