Translation: Asked to transmit frame type G.711 A-law, while native formats is G.711 u-law (read/write =G.711 u-law/G.711 u-law)
Looks to me like you need a disallow=all in your sip.conf and allow= lines for the codecs you want to allow, then make sure that the IP phones you are using support at least one of the codecs you are specifying in sip.conf Try "show codecs" at the Asterisk CLI. On Mon, 2003-10-13 at 04:48, [EMAIL PROTECTED] wrote: > When dialling in and dialling my extension, when answered I get > > > " Read_channel ## vpb/1-3: Setting record mode, bridge = 0 > WARNING[20499]: File chan_sip.c, Line 1111 (sip_write): Asked to > transmit frame type 8, while native formats is 4 (read/write = 4/4) > == Spawn extension (default, 1004, 1) exited non-zero on 'vpb/1-3' > -- hangup on vpb (vpb/1-3) > -- Hungup on vpb/1-3 complete > -- Event [12=>[02] Loop Drop " > > > And it hangs up the line any ideas ??? > > Regards Mick > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Sample configs and more: http://www.fnords.org/~eric/asterisk/ BTEL Consulting +1-850-484-4535 x2111 (Pensacola) +1-504-595-3916 x2111 (New Orleans) +1-877-677-9643 x2111 (Toll Free) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
