----- Original Message ----- From: "WipeOut" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, October 20, 2003 9:26 PM Subject: Re: [Asterisk-Users] No detection of Line Busy
> [EMAIL PROTECTED] wrote: > > >Hello, > > > >I am quite new to asterisk. > >I managed to connect our 2 branch offices with asterisk. > > > >In one side, our linux asterisk box is connected to the leased line going > >to our other office and on the other side its connected to office PBX through a > >channel bank. > > > >This installation is running smoothly, except for one thing. > >If an extension is busy, i want to transfer that call to a near by > >one, so i did like this, > > Dial(Zap/g1/55|15|t) > > Dial(Zap/g1/59|15|t) > >the prob is, when ext. 55 is busy, the caller hear busy tone and thats all, > >asterisk doesn't execute the second line. > >even when the ext. 55 is busy, still the asterisk log says,that zap line > >as answered. > >I need to get this thing settled quickly, cos, this is a already found > >feature in our office hardware PBX. > >Can anyone pls help me???? > > > >Herc > > > > > > > > > > Try something like.. > > exten => 55,1,Dial(Zap/x|15|t) > exten => 55,102,Dial(Zap/y|15|t) > > Where Zap/x is the channel that connects extension 55 and Zap/y is the > channel that connects to extension 59.. > > Later.. > I am not directlyl connecting to extensions 55 and 59. I have few office PBX extensions coming to the channel bank(which is connected to linux box), and i have grouped those channels under 'g1'. so i am dialing ext 55 and 59 from extensions in group 'g1'. Herc _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users