On Fri, 2006-02-24 at 10:58 +0000, Barry Flanagan wrote: > > Asterisk Sales wrote: > > <mailto:asterisk-users@lists.digium.com> > > > > Hello list, > > Is there any way to use a2billing without the IVR for the sip/iax users. > > (authentication is done by the user id and pass as user registers with > > asterisk). > > > > I want to dial the destination number to the asterisk. for example: > > > > user dials, > > exten =>_011.,1,DeadAGI(a2billing) > > > > system will connect the destination and bill them. but right now we need > > to enter the destination followed by the IVR prompts which i dont want. > > > > Thanks in advanved if anybody can help me. > > > > Yes, this is all configurable from /etc/asterisk/a2billing.conf > > If you set use_dnid=YES then a2billing will pick up the destination from > the number the user dialled. > > Set the following to turn off the IVR stuff: > > ; Play the balance to the user after the authentication (values : yes - no) > say_balance_after_auth=NO > > ; Play the balance to the user after the call (values : yes - no) > say_balance_after_call=NO > > ; Play the time the user can call (values : yes - no) > say_timetocall=NO > > Hope this helps. >
Thank you, is working for me right now :) > -- Guillermo Salas M. Telconet S.A. Manta Calle 15 y Av. 24 Esq. Phone : 593 5 262 8071 Mobile: 593 9 985 5138 SIP : [EMAIL PROTECTED] e-mail: [EMAIL PROTECTED] www : http://www.telconet.net http://www.telcocarrier.net Linux User: 255902 Soporte en Linea en http://www.manta.telconet.net Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users