Hi Steve, This is definately the way to go when you are dealing with NAT.
I have simulair setups running like this myself and it works perfectly. Only think you need to do in the sip.conf entries is add canreinvite=no This will force any sip-calls from the outside to be routed thru *. Greetings, Tjardick -- Tjardick van der Kraan [EMAIL PROTECTED] IAXtel: 1 700 344 0522 FWD: 26322 IPtel: 91331 ----- Original Message ----- From: "Steven M. Sokol" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 22, 2003 5:22 PM Subject: [Asterisk-Users] Running Asterisk and NAT on the same box? > Has anyone tried installing * on a box with two eth interfaces which is > acting as a NAT box? I have only one IP at this point and I would like > to get * working without all of the NAT issues. My idea is to run * on > my gateway (which is also running the firewall and masquerade services). > All of my UAs (Grandstream + Xten X-LITE + gnophone) will be inside the > NAT screen, and will connect to the * using its PUBLIC (outside) > address. > > Does this sound reasonable? > > Thanks, > > Steve > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users