Pls Post your Asterisk CLI when Fax is incoming.
On 9/4/06, [EMAIL PROTECTED] <
[EMAIL PROTECTED]> wrote:
I read on this list not so long ago that you should only enable alaw. I've
never tested this.
Phil.
"Jose Limeres"
<[EMAIL PROTECTED]
om> To
Sent by: "Asterisk Users Mailing List -
asterisk-users-bo Non-Commercial Discussion"
[EMAIL PROTECTED] <asterisk-users@lists.digium.com>
m.com cc
Subje ct
04/09/2006 15:35 [asterisk-users] FAX handling
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<[EMAIL PROTECTED]
ists.digium.com>
Hi all,
I am using asterisk 1.2.10 BRI stuffed 0.3.0-PRE-1s with zaptel 1.2.8 and
we are trying to have FAX receiving working in
one of the BRI lines.
No problem with FAX transmissions but we can not receive. I have configured
in zapata.conf faxdetect=both (tx and rx).
FAX machine is connected to one FXS port on a PAP2 with G711a and no echo
cancelation configured. When the FAX arrives at the
FAX machine, they start negotiating but then it stops as if the format is
not recognized by the Fax machine as a valid fax.
Does anyone have a similar configuration working?
Bests,
Jose Limeres_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Com os melhores cumprimentos,
Marco Mouta
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
