Dial(Zap/g1/.... As long as they are in the same group asterisk will pick an unused card.
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Tony Kava > Sent: Monday, November 24, 2003 12:45 PM > To: '[EMAIL PROTECTED]' > Subject: [Asterisk-Users] Picking an open channel (FXO port) for outbound > calls > > Greetings: > > I did some quick searching of my history of this list, and I tried a quick > Google search as well, but perhaps someone on the list can quickly answer > this question. I have a very nicely working Asterisk system at home with > two Digium X100P FXO cards. When my SIP phones want to dial-out I have > them > setup to grab the first analog card (Zap/1) with the following > extensions.conf segment: > > ==== snippet ==== > > ; Outbound > exten => _9.,1,Dial(Zap/1/${EXTEN:1},90,Tt) > exten => _9.,2,Macro(fastbusy) > exten => _9.,102,Macro(fastbusy) > > ==== /snippet ==== > > Zap/1 and Zap/2 are analog phone lines. What is the best method of > picking > an open line when someone tries to dial-out? i.e. if Zap/1 is in use how > can > I instruct Asterisk to use Zap/2 and vice versa? I know complex methods of > making this happen, but I'm sure there is a very simple way to accomplish > this task. > > Thanks. > > -- > Tony Kava > Network Administrator > Pottawattamie County, Iowa > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users