Hi folks,
To provide MWI, * will send out a sip:notify message to the UA.
The originator of this message is asterisk, as shown below;
NOTIFY sip:[EMAIL PROTECTED]:5065 SIP/2.0 Via: SIP/2.0/UDP 66.121.xxx.yyy:5060;branch=z9hG4bK0466cb21 From: "asterisk" <sip:[EMAIL PROTECTED]>;tag=as0ffb1bdc <=============== To: <sip:[EMAIL PROTECTED]:5065> Contact: <sip:[EMAIL PROTECTED]> Call-ID: [EMAIL PROTECTED] CSeq: 102 NOTIFY User-Agent: Asterisk PBX Event: message-summary Content-Type: application/simple-message-summary Content-Length: 38
Messages-Waiting: yes Voicemail: 4/11
Is there a way that I can change this 'originator' to a numeric value ?
Cheers
SW
SW -
See the below conversation from April regarding the same topic. I don't think this became a patch or made it into CVS.
JT
At 7:59 PM -0500 4/27/03, Mark Spencer wrote:
Sounds like the SNOM expects to use our "Contact" to get a hold of us. It should be simple to add something like "voicemail=<foo>" in the general section for setting the voicemail extension to use in the contact area.
Mark
On Thu, 24 Apr 2003, WipeOut . wrote:
Here is the trace if anyone is interested..> Via: SIP/2.0/UDP 192.168.1.200:5060;branch=z9hG4bK523b1b63
NOTIFY sip:[EMAIL PROTECTED] SIP/2.0> > ThanksFrom: "asterisk" <sip:[EMAIL PROTECTED]>;tag=as3da6a846 To: <sip:[EMAIL PROTECTED]> Contact: <sip:[EMAIL PROTECTED]> Call-ID: [EMAIL PROTECTED] CSeq: 102 NOTIFY User-Agent: Asterisk PBX Event: message-summary Content-Type: application/simple-message-summary Content-Length: 36
Message-Waiting: yes Voicemail: 1/0
> Hi,
>
> The MWI is working on the SNOM 200 but the problem is that when you press the MWI button it attempts to dial
> "asterisk" <sip:[EMAIL PROTECTED]>
> where 192.168.1.200 is the IP address of my * box.
>
> How can I modify this so the return path is correct, which on my setup is extension 8500 for voicmailmain??
>
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users