On Wed, Feb 27, 2008 at 6:58 PM, Tzafrir Cohen <[EMAIL PROTECTED]> wrote:
> > Let's say I configure the FXS ports in the Astribank as channels 41 & > > 42 (only 2 for the moment). > > Hmmm... One full E1 span will get you channels 1-31 (even if you use > only up to channel 24, the span will register 31 channels). So the > FXS ports of the Astribank will occupy ports 32-39 and 46-53 (40-45 are > the I/O ports). > > But then again, normally you just use zapconf / genzaptelconf and get a > working configuration. > > So I suspect you got the channel numbers wrong there. I used those numbers as an example, but I though I could relocate the Astribank channels to a higher number and have a cleaner setup. I don't like using automatic tools, because they used the american defaults. Should I just use zapconf/genzaptelconf and change the zones? Thanks -- Andres Jimenez GPG : http://www.andresin.com/gpg/[EMAIL PROTECTED] _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users