You'll probably need to turn on pri debugging for this span and then capture the output from when you connect the T1 cable. That might yield some clues, like whether or not any activity is happening on the d-channel and if so, if there are any errors that might tell you what's going on.
-MC ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eve-Ellen Cole Sent: Thursday, June 19, 2008 12:39 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] Trouble with PRI config Right again, getting a little closer (babysteps) ... no alarms on either system, but when I check the pri status in the CLI, I get PRI span 2/0: Provisioned, Down, Active. I've searched for clues, but am not coming up with the next step. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Totaro Sent: Thursday, June 19, 2008 1:41 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Trouble with PRI config pri_net usually when connecting to a legacy system. Thanks, Steve T On Thu, Jun 19, 2008 at 1:38 PM, Eve-Ellen Cole <[EMAIL PROTECTED]> wrote: > The underscore helped, but didn't resolve the real issue. Now I get the > following messages: > > [Jun 19 13:36:15] WARNING[4288] chan_zap.c: PRI Error on span 0: We think > we're the CPE, but they think they're the CPE too. > > [Jun 19 13:36:16] WARNING[4288] chan_zap.c: No D-channels available! Using > Primary channel 48 as D-channel anyway! > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Steve Totaro > Sent: Thursday, June 19, 2008 1:12 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Trouble with PRI config > > Try underscore _ rather than dash - > > Thanks, > Steve T > > On Thu, Jun 19, 2008 at 12:51 PM, Eve-Ellen Cole > <[EMAIL PROTECTED]> wrote: >> I'm trying to connect Asterisk 1.4.20 to Avaya Definity G3R v11.1 via a T1 >> crossover, and I'm currently stuck. Anyone have any thoughts on what I >> can >> do to get past this? >> >> Asterisk side >> >> Digium TE220B w/ green LED (using port 2) >> >> Zaptel.conf >> >> span=2,1,0,esf,b8zs >> >> bchan=25-47 >> >> dchan=48 >> >> loadzone = us >> >> defaultzone=us >> >> Zapata.conf >> >> context=default >> >> switchtype=national >> >> ; T1 PRI to Avaya Definity G3R >> >> context=from_pbx >> >> signalling=pri-cpe >> >> group=3 >> >> channel => 25 >> >> Avaya side >> >> TN464GP >> >> Ds1 01C14 >> >> Framing mode: esf >> >> Line coding: b8zs >> >> Signaling mode: isdn-pri >> >> Connect: Network >> >> Protocol version: b (national) >> >> Near-end CSU type: other (for the T1 crossover) >> >> Signaling group 6 >> >> Primary d-channel set to 01C14 >> >> When I restart Asterisk, the following lines get logged to >> /var/log/asterisk/messages: >> >> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Unknown signalling method >> 'pri-cpe' >> >> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Signalling must be specified >> before any channels are. >> >> If I change signaling method to pri-net: >> >> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Unknown signalling method >> 'pri-net' >> >> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Signalling must be specified >> before any channels are. >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> AstriCon 2008 - September 22 - 25 Phoenix, Arizona >> Register Now: http://www.astricon.net >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users