I cannot tell for sure for any system, but we have an old Portmaster PM3 hooked-up from one port of our Sangoma A104d card, another one being from telco.
So, yes you can "emulate" the telco from a sangoma A10x card. Here's what I have in my zapata.conf : ;Sangoma A104 port 1 [slot:12 bus:0 span: 1] switchtype=national pridialplan=unknown signalling=pri_cpe group=1 channel => 1-23 ;Sangoma A104 port 2 [slot:12 bus:0 span: 2] echocancel=no pridialplan=national signalling=pri_net group=2 channel => 25-47 You might have noticed that the signalling is different for both port. pri_net being the "telco emulatin" one. The clock needs also to be set on "master" in the wancfg utility. Another thing, you might want to consider using a 2 port card for that, because the clock master needs a reference and I can't tell for sure if it'll work with a reference from another card. Regards, Nicolas > Hi guys, > Can I use a Sangoma a101 to interface a legacy pbx to an Asterisk server? > The pbx doesn't have sip and I want to come in off of a sip trunk and > interface with the older system. > I know I can use a pri card to hook in to the phone network, but can I use > this same card to feed back the signaling as if I were the phone company > to > the older system? > > Thanks, > Tom _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users